Suzhou Yixinjia Packaging Machinery Technology Co., Ltd.
Contact: Miss Yang
Add：Wengtang Wengjia Market, Liantang Town, Changshu City, Suzhou City
Multi-function sealing and folding machine
The belt is sent to the position → the bundle signal is received → the brake is released, the main motor starts (1) → the right top knife rises, and the right belt is held at the skateboard (2) → the “T” guide is retracted (3) → the proximity switch senses Retract the probe (4) → the main motor stops, the brake is closed (5) → the strapping machine retracts the motor to rotate, and the belt is retracted for 0.35 seconds (6) → the strap is tightened and tied on the object (7) → the main motor is started twice , brake pull (8) → large swing rod secondary draw belt, tighten the belt (9) → left top body rise, press the lower layer belt (10) → heat sheet into the middle of the two belts (11) → middle top knife Ascending, cut the belt (12) → the middle top knife is lowered (13) → the middle top knife rises again, so that the two belts are firmly bonded (14) → the middle top knife is lowered, and the left and right top knife are simultaneously lowered (15) → the heating sheet is reset ( 16)→Skateboard back (17)→“T” type guide plate reset (18)→Proximity switch senses the belt feed probe (19)→The belt feed motor starts, drives the belt feed belt (20)→large swing rod reset (21) →The belt is in place, with the head to the “T” guide (22) → the proximity switch senses the double probe (23) → the main motor stops, the brake pulls (24) → the baler completes a working cycle, then seals The process of the box: After the product is packaged, it is sent to the sealing machine through the conveyor chain (belt, roller) and delivered to the infusion box mechanism. The two sides of the carton are clamped by the clamping box belt and move forward. The front short tongue is automatically bent by the pressure-pressing tongue frame, and the rear short tongue has a detection signal (photoelectric signal) to notify the tongue-changing cylinder when the carton enters the sealing machine idler, and is bent by the tongue-splitting frame, and a signal is notified to melt. The glue machine automatically sprays glue. The carton continues to move forward, and the left and right long tongues are automatically bent toward the middle through the guide bar. At the same time, the belt mechanism mechanism belt presses the left and right long tongues of the carton synchronously, so that the box, the tongue and the glue are combined to complete the sealing and shaping action, that is, the product packaging. The last process - automatic sealing.